ECOXGEAR T2USB200: Tape 2 USB - Manual (Page 41)

• If you are not seeing the microphone slider, please go to the Preferences menu in Audacity, click on
the Interface tab, and make sure that the Enable Mixer Toolbar and Enable Meter Toolbar options are
checked. If they are not, please check them and then press OK.
• Check the microphone slider to make sure that it is at full volume, all the way to the right as shown in
the image below: If you are not seeing the microphone slider, please go to the Preferences menu in
Audacity, click on the Interface tab and make sure that the Enable Mixer Toolbar and Enable Meter
Toolbar options are checked. If they are not, please check them and then press OK.
_______________________________________________________________________________
PROBLEM: POOR SOUND QULITY
SOLUTION:
• Make sure that your RCA plugs are plugged into a source or not touching bare metal. If you are
experiencing noise through the USB, you may have interference from the RCA plugs. Ensure the USB
cable is not touching or near any other cables.
• Unit may be too close to an electrical /magnetic appliance. Turn off nearby appliance or relocate unit.
• If you experience any odd sounds coming from the recording, try closing all applications, restart the
computer, and only run Audacity while recording.
40