Elkhart Brass Cobra EXM Light Kit User Manual
Page 7
Advertising
7
LIGHT KIT OPERATION INSTRUCTIONS
Power must be supplied to the EXM monitor, controllers, and light kit in order to operate the light kit.
To power on a light connected to the light kit, press and hold down the AUX button and press either
FOG or STREAM. (On the joystick, roll the thumbwheel forward for STREAM and backward for FOG)
A light plugged into pins 1 and 2 will turn on when FOG is pressed
A light plugged into pins 3 and 4 will turn on when STREAM is pressed
To power off a light connected to the light kit, press and hold down the AUX button and press either
FOG or STREAM a second time. (Joystick: forward=STREAM / backward=FOG)
Advertising