Elkhart Brass Scorpion RF 8294-07 User Manual
Page 13
Advertising
13
Press the RED program button (SW1). The LED DS6 will blink two (2) times.
Press both FOG and STRAIGHT STREAM simultaneously on either a primary or secondary
controller, and hold for 5 seconds.
Position the monitor to the right upper limit of the travel window.
Press the RED program button (SW1). The LED DS6 will blink three (3) times.
Position the monitor to the desired stow position.
Press the RED program button (SW1). The LED DS6 will blink four (4) times.
Programming of the travel limits and stow position are now complete.
Advertising