Englert S3000 User Manual
Page 3
3
1.5 SUBMITTALS
A.
Product Data: Include construction details, material descriptions, dimensions of individual components and
profiles, and finishes for each type of metal roof panel and accessory.
B.
Shop Drawings: Show fabrication and installation of layouts of metal roof panels, metal wall panels, metal soffits;
details of edge conditions, gutters, leaders, joints, expansion joints, panel profiles, corners, anchorages, trim,
flashings, closures, and accessories; and special details. Distinguish between factory and field assembled work.
C.
Shop Drawings must be in scale large enough to clearly show all layers. Include dimensions of fabricated work,
reference dimensions to the structure, show type, size and spacing of fasteners, with material thickness and
finishes.
D.
Submit With the Drawings: Copies of independent laboratory tests, mill certifications, certifying structural
performance data on the panels, anchor clips, and fasteners to meet the structural testing and performance and
materials requirements of this specification as indicated in Section 1.4. Manufacturer’s certification letters will not
be accepted in lieu of the specified independent laboratory tests or mill certifications.
1. Accessories : Include details of the following items, at a scale of not less than 1-1/2 inches per 12 inches
(1:10):
a. Flashing and trim.
b. Gutters.
c. Downspouts.
d. Roof Curbs.
e. Fasteners.
E.
Samples for Initial Selection: For each type of metal roof panel indicated with factory-applied color finishes
provide manufacturer’s full range colors for initial selection.
F.
Samples for Verification: For each type of exposed finish required, prepare samples:
1. Metal Roof, Soffit and Wall Panels: Include fasteners, clips, battens, clsoures, and other metal roof panel
accessories.
2. Trim and Closures
3. Vapor Retarders.
4. Accessories.
G.
Qualification Data: For installer.
I.
Product Test Reports: Based on evaluation of comprehensive tests performed by a qualified testing agency , for
the following:
1. Metal Roof: Include reports for air infiltration, water penetration, thermal performance, and structural
performance.
J. Warranties: Special warranties specified in this Section.
1.6 QUALITY ASSURANCE
A.
Installer Qualifications: Installer approved by Manufacturer.
1.
Installer’s Responsibilities include fabricating and installing metal roof panel assemblies..
2.
Engineering Responsibilities: Preparation of data for metal roof panels, including Shop Drawings.