Englert S3000 User Manual
Page 6
6
B.
Special Warranty on Panel Finishes: Manufacturer’s standard from in which Manufacturer agrees to repair finish
or replace metal roof panels that show evidence of deterioration of factory-applied finishes within the specified
warranty period.
1. Ultra Cool Fluoropolymer Finish: Deterioration includes, but is not limited to the following:
a. Color fading more than 5 Hunter units when tested according to ASTM-D-2244.
b. Chalking in excess of a No. 8 rating when tested according to ASTM-D-4214.
c. Cracking, checking, peeling, or failure of paint to adhere to bare metal.
2. Finish Warranty Period: Thirty five years from date of Substantial Completion. Must meet Energy Star
criteria for reflectance.
C.
Special Weathertightness Warranty: Manufacturer’s standard from in which Manufacturer agrees to repair or
replace metal roof panel assemblies that fail to remain weathertight, including leaks, within specified warranty
period.
1. Weathertight Warranty Period: (Choose 5, 10, 15, 20, 25 or 30 year)
PART II – PRODUCTS
2.1
MANUFACTURERS
A.
In another part 2 articles where titles below introduce lists, the following requirements apply for product selection:
1. Products: Subject to compliance with requirements, provide one of the products specified
.
2.2
MATERIALS – PANELS and SHEETS
A.
This is a performance specification. Manufacturers wishing to bid this project must comply with all performance
aspects and pre -qualification criteria of this specification as well as pre-qualification criteria of this specification as
well as prescriptive items such as seam height, machine seaming of panel side joinery, panel width, material
gauges, etc. The basis for this specification is the Englert Series 3000 and all specified performance criteria must
be strictly adhered to.
A. Felts: ASTM-D-226, Type II (No. 30), asphalt-saturated organic felts.
B. Self-Adhering, Polyethylene-Faced Sheet: ASTM-D-1970, 40 mils (1.0 mm) thick minimum, hightemp non-
abrasive, consisting of slip-resisting polyethylene-film reinforcing and top surface laminated to SBS-modified
asphalt adhesive, with release-paper backing; cold applied.
1. Products (as approved by manufacturer):
A. Certainteed HT
B. Grace, W.R. & Company, Grace Ice and Water Shield, Vycor
C. Carlisle Dry Starta