ETC Eos Family v2.2.0 - Manual (Page 11)

E T C S u p p l e m e n t
Eos Family v2.2.0
Eos Family Operations Manual Supplement Page 11 Electronic Theatre Controls, Inc.
• Active Cue
• The number of cues in the list (Multipart cues are only counted once)
• First cue in the list
• Last cue in the list
• Partition
• Playback number and physical fader location of the cue list
• Channels currently controlled in live by the cue list
• Channels with any intensities above 0 in the cue list
• Channels with Parameters stored in the cue list but no intensities
Changes to User Interface
Changes to Snapshots
The following changes have been made to the snapshot screen ([Snapshot] [Snapshot]):
• The {Faders} button is no longer selected by default.
• A {Visible Workspaces} button has been added to snapshot only the visible workspaces.
• An {All Workspaces} button has been added to quickly include all workspaces, including
those not visible at the time of recording.
• Direct selects is no longer a separate option.
See Snapshots on page 6 for information on single monitor snapshots.
Snapshots Added to Element
Snapshot functionality has been added to the Element console with the addition of a {Snapshot}
softkey.You can now store all of the monitor configurations for your Element console. All displays
are automatically included in all snapshots.
Changes to Setup
Default Preheat Time
An option for default preheat time has been added to Setup>ShowSettings.
If this option is disabled, the cue’s up intensity time will be used when
preheating. The default setting is “Disabled”.
Changes to Channel Distribution
When {Offset} is pressed, a new channel distribution display will open.
The following options are available as extensions of {Offset}. Previously only {Reverse},
{Random}, {Odd}, {Even}, and {Reorder} were available. Options can be used together. These
extensions can be used to create subgroups. For more information on subgroups, please see the
Eos Family v2.0.1 Operations Manual Supplement.