ETC Eos Family v2.2.0 - Manual (Page 13)

E T C S u p p l e m e n t
Eos Family v2.2.0
Eos Family Operations Manual Supplement Page 13 Electronic Theatre Controls, Inc.
Changes to Effects
Effect Channel Display
The ability to override certain effect properties per channel at the cue level has been added.
The effect channel display has been added for this. To open this display, press [Shift] + [Effect] or
select the effect channel icon from the display management home screen, see
Display Icons on
page 5 .
The following properties can be overridden:
• Rate
• BPM
• Size (Relative Effects Only)
• H Form (Focus Effects Only)
• V Form (Focus Effects Only)
• Axis (Focus Effects Only)
[2][6]<Effect><1>{Rate}[6][Enter] - to change the rate for just channel 26. With the effect running,
the console will default to the running effect number. You may need to select the effect first ([Effect]
[n] [Enter]). This will open the effect status display, and you will have access to the effect softkeys.
In the effect status display, an “+” will display by any effect property that has a channel level
override.
You can then store these channel overrides in a cue by using [Record] or [Update].
N o t e : To add a channel level override, first you will need to be in the Effect Channel
display with the effect running. The effect status display also needs to be open.To
learn how to apply an effect, please see the Apply an Existing Effect section of the
Creating and Using Effects chapter of your console’s manual.