Connection – BenQ Digital Projector LX60ST User Manual
Page 17
Connection
17
Connection
When connecting a signal source to the projector, be sure to:
1.
Turn all equipment off before making any connections.
2.
Use the correct signal cables for each source.
3.
Ensure the cables are firmly inserted.
•
In the connections shown below, some cables may not be included with the projector (see
). They are commercially available from electronics stores.
•
The connection illustrations below are for reference only. The rear connecting jacks available on the
projector vary with each projector model.
1.
VGA cable
2.
VGA to DVI-A cable
3.
USB cable
4.
Component Video to VGA (D-Sub)
adapter cable
5.
S-Video cable
6.
Video cable
7.
Audio L/R cable
8.
Audio cable
9.
Microphone
10. USB flash drive/USB wireless dongle
11. HDMI cable
8
8
8
9
1
2
1
3
7
4
5
6
10
11
Notebook or desktop
computer
Speakers
or
A/V device
Monitor
(DVI)
(VGA)
Microphone
or