BenQ Digital Projector LX60ST - Manual (Page 26)

Operation 26
Disabling the password function
To disable password protection, go back to the SYSTEM SETUP: Advanced >
Security Settings > Change Security Settings menu after opening the OSD menu
system. Press MODE/ENTER. The message “INPUT PASSWORD” is displayed.
Enter the current password.
i. If the password is correct, the OSD menu returns to the Security Settings
page.
Press to highlight Power On Lock and press / to select Off. You will
not have to enter the password next time when turning on the projector.
Press to highlight Splash Screen Lock and press / to select Off. The
Splash Screen function in the SYSTEM SETUP: Basic menu will be available
for your change.
ii. If the password is incorrect, the password error message is displayed lasting for
three seconds, and the message “INPUT PASSWORD” is displayed for your
retry. You can press MENU/EXIT to cancel the change or try another
password.
Though the password function is disabled, you need to keep the old password in hand should you ever need to
re-activate the password function by entering the old password.