BenQ Digital Projector LX60ST - Manual (Page 43)

Operation 43
Function Description
Teaching
Template
Provides several preset patterns for various teaching purposes.
Choose Blackboard or Whiteboard first by pressing / and
press / to choose the pattern you need. Press MODE/ENTER
to display the selected pattern.
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
picture mode" on page 30 for details.
Reference
Mode
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See "Setting the User 1/User 2 mode" on page 30
for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on
page 31 for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 31 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 31 for details.
This function is only available when a Video, S-Video or Component Video
signal is selected.
Tint
Adjusts the red and green color tones of the image. See "Adjusting
Tint" on page 31 for details.
This function is only available when a Video or S-Video signal is selected and
the system format is NTSC.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 31 for details.
This function is only available when a Video, S-Video or Component Video
signal is selected.
Brilliant Color See "Adjusting Brilliant Color" on page 31 for details.
Color
Temperature
There are four color temperature settings available. See "Selecting a
color temperature" on page 31 for details.
3D Color
Management
See "3D Color Management" on page 32 for details.
Save Settings Saves the settings made for User 1 or User 2 mode.
1. DISPLAY me
nu
2. PICTURE men
u