BenQ Digital Projector LX60ST - Manual (Page 27)

Operation 27
Switching input signal
The projector can be connected to multiple devices at the same time. However, it can only
display one full screen at a time. When starting up, the projector automatically searches for
the available signals.
Be sure the Quick Auto Search function in the SOURCE menu is On if you want the
projector to automatically search for the signals.
To select the source:
1. Press SOURCE on the projector or remote
control. A source selection bar is displayed.
2. Press / until your desired signal is selected
and press MODE/ENTER.
If available, you can also select the source by
pressing one of the Source buttons on the
remote control.
Once detected, the selected source information
will be displayed at the corner of the screen for
seconds. If there is multiple equipment
connected to the projector, repeat steps 1-2 to
search for another signal.
• The brightness level of the projected image will change
accordingly when you switch between different input signals.
Data (graphic) "PC" presentations using mostly static images
are generally brighter than "Video" using mostly moving
images (movies).
• For best display picture results, you should select and use an
input signal which outputs at the projector’s native resolution.
Any other resolutions will be scaled by the projector depending upon the “aspect ratio” setting, which
may cause some image distortion or loss of picture clarity. See "Selecting the aspect ratio" on page 28 for
details.
• Firewall in the PC must be switched off to allow QPresenter and USB Display to work.
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the projector’s
HDMI input and the projected picture displays wrong colors, please change the color
space to YUV.
To do this:
1.
Press MENU/EXIT and then press / until the SOURCE menu is highlighted.
2. Press to highlight Color Space Conversion and press / to select a suitable
color space.
This function is only available when the HDMI-input port is in use.
Computer1/YPbPr1
Computer2/YPbPr2
HDMI
Video
S-Video
Network Display
USB Display
USB Reader