Barco MD-4221 - Manual (Page 6)

6
Safety Instructions
On Safety
1. Before connecting the AC power cord to the DC adapter outlet make sure the
voltage designation of the DC adapter corresponds to the local electrical
supply.
2. Never insert anything metallic into the cabinet openings of the Liquid Crystal
Display (LCD) monitor. Doing so may create the danger of electric shock.
3. To reduce the risk of electric shock, do not remove cover.
No user-serviceable parts inside. Only a qualified technician should open the
case of the LCD monitor.
4. Never use your LCD monitor if the power cord has been damaged.
Do not allow anything to rest on the power cord, and keep the cord away
from areas where people can trip over it.
5. Be sure to hold the plug, not the cord, when disconnecting the LCD monitor
from an electric socket.
6. Unplug your LCD monitor when it is going to be left unused for an extended
period of time.
7. Unplug your LCD monitor from the AC outlet before any service.
8. If your LCD monitor does not operate normally-in particular, if there are any
unusual sounds or smells coming from it, unplug it immediately and contact
an authorized dealer or service center.
Warning
Do not to touch signal input, signal output or other connectors, and the patient
simultaneously.
Warning
External equipment intended for connection to signal input, signal output or other
connectors, shall comply with relevant IEC standard (e.g.,IEC60950 for IT equipment and
IEC60601 series for medical electrical equipment).
In addition, all such combinations (systems) shall comply with the standard IEC
60601-1-1, safety requirements for medical electrical systems. Any person who connects
has formed at system and is therefore responsible for the system to comply with the
requirements of IEC 60601-1-1.
If in doubt, contact a qualified technician or your local sales representative.