Barco MD-4221 - Manual (Page 9)

9
Use the proper power cord with correct attachment plug type. If the power source is
120V AC, use a power cord which is a Hospital Grade Power Cord with NEMA 5-15 style
plug, labeled for 125 volts AC with UL and C-UL approvals. If the power source is a 240 V
AC supply, use the tandem (T blade) type attachment plug with ground conductor power
cord that meets the respective European country's safety regulations.
The hospital-grade plug for medical products intended for use in Denmark has DEMKO
approval and is rated 13 amps at 250Vac. Plug is recommended for use in medical
applications and specifications are being added to the standard S B 107-2-D1. Plug mates
with maker's Danish hospital-grade socket. Hospital sockets have slightly different
shaped openings allowing only the hospital plug, not the standard Danish plug, to be
inserted, to protect the ac circuit in specific medical settings.
Cleaning Instructions
Follow your hospital protocol for the handling of blood and body fluids.
Clean the display with a diluted mixture of mild detergent and water. Use
a soft towel or swab.
Use of certain cleaning agents may cause degradation to the labels and
plastic components of the product.
Consult cleanser manufacturer to see if agent is compatible with it. Do not
allow liquid enter the display.
Maintenance
Replacing the Fuses:
To avoid the risk of fire, use only fuses of the value specified on the fuse
label located on the rear panel.
• Unplug the power cord from the wall outlet.
• Unlatch the fuse holder above the AC inlet and remove it. (You may need to
press the tab on the fuse holder with a slender screwdriver to release the latch)
• Replace the fuse with the same value and rating.
• Reinstall the fuse holder until the tab snaps in place.