Barco MD-4221 - Manual (Page 8)

8
Caution
To prevent fire or shock hazards, do not expose this unit to rain or moisture. Also, do not
use this unit's polarized plug with an extension cord receptacle or other outlets unless
the prongs can be fully inserted.
The display is designed to meet the medical safety requirements for patient vicinity
device.
This device may not be used in connection with life support equipment.
This symbol alerts the user that important literature concerning the
operation of this unit has been included. Therefore, it should be read
carefully in order to avoid potential problems.
This symbol warns user that un-insulated voltage within the unit may
have sufficient magnitude to cause electrical shock. Therefore, it is
dangerous to make contact with any part inside the unit. To reduce the
risk of electric shock, DO NOT remove cover (or back).
There are no user serviceable parts inside. Refer servicing to qualified
service personal.
Underwriters Laboratories (UL) Classification:
UL safety Compliance:
This LCD monitor is U.L. Classified WITH RESPECT TO ELECTRIC SHOCK, FIRE
AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH
UL 60601-1/CAN/CSA C22.2 NO. 601.1
EEC Safety Compliance:
This display unit meets the requirements of EN-60601-1 so as to conform
to the Medical Device Directive 93/42/EEC (general safety information).
Using Plug for US: 120V rating 5-15P type only.
Caution: Make sure the power cord is the correct type that is required in your area.
This LCD monitor has a universal power supply that allows operation in either 100-120V
AC or 200-240V AC voltage areas (no user adjustment is required).