HiRO H50188 - Manual (Page 11)

9
WLAN ADSL2+ Router
If you have a PSTN telephone line (normal analog line) connect the router as shown
below:
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to any of the 4
WLAN ADSL2+ Router's LAN Ports.
2. Connect the supplied RJ11 telephone cable from your home's telephone jack to the “LINE”
port of the supplied splitter. Connect the other supplied RJ11 telephone cable to the “DSL”
port of the splitter and connect the other end of this cable to the “LINE” port of your WLAN
ADSL2+ Router. (If there is no option Splitter, please connect the supplied RJ11 telephone
cable from your home's telephone jack to the “LINE” port of your WLAN ADSL2+ Router.)
3. Connect a RJ11 telephone cable to the “PHONE” port of the splitter and connect the other
end to your telephone.
4. Connect the power adapter to the power inlet “POWER” of the WLAN ADSL2+ Router and
turn the “ON/OFF SWITCH” switch of your WLAN ADSL2+ Router on.