HiRO H50188 - Manual (Page 22)

20
WLAN ADSL2+ Router
5. Please enter the “ESSID” and Wireless “Default Channel” if you want to change (the
default settings Network= Enable, ESSID = TW263R4, Default Channel=6).
6. Choose the Encryption type if necessary, as Off – No Encryption (Default) / 64 Bit
Encryption / 128 Bit Encryption / Wi-Fi Protected Access (TKIP) / Wi-Fi Protected Access2
(AES-CCMP) and WPA Mixed Mode. For example, you choose the WPA Mixed Mode type
and configure Passphrase.
7. Please
click “Setup” button, when the procedure is completed, it will start to configure the
device for a while.