Baracoda 2 - Manual (Page 20)

BaracodaPencil 2 – Communication Protocol v1.3 - 20 -
Data Capture
for Workforce
in Motion
{Stored barcodes count [15:8]}
{Stored barcodes count [7:0]}
Code ID 0xFA-0xFB
Description Get and erase stored barcodes
Payload None
Response 1 byte:
{(Bit 0:Success)}
Code ID 0xFC-0xFD
Description Erase stored barcodes
Payload None
Response 1 byte:
{(Bit 0:Success)}
Code ID 0xFE-0xFF
Description Barcode decoder Commands
Payload {header} {type} {size} “Parameters”
Response If the device responds:
{Code ID}{length}{header}{type} {response size} “Response”
Else: {0}
Barcode decoder specific commands from the Platform2 Decoder communication protocol are to be
framed within the payload of this message.