HYDAC HMG 510 - Manual (Page 18)

18
Menu Structure and Navigation When Using Two Sensors
Nutshell description
Mode Menu item Function description
1x
SEnA unIT Select the unit of measurement of channel A
2x
SEnB unIT Select the unit of measurement of channel B
3x
SEnA TAR Set or clear the zero point, channel A
4x
SEnB TAR Set or clear the zero point, channel B
5x DIFF
TAR Compute the differentials between the tare
values of channel A and channel B
6x
SP Setting aid for mechanical pressure switches
7x
VerS Display of the unit’s software version
8x
Back to measured value display
Detailed description
•
Mode Press 1x / 2x
Selecting the unit of
measurement
(channel A/B)
Use the arrow keys (◄, ►) to
choose between the units of
measurement offered:
Pressure:
bar, PSI, MPA
Temperature: °C, K, °F
Flow rate:
l/m (in), g/m (in)
•
Mode Press 3x / 4x
Setting or clearing the zero point
(channel A/B)
Use the arrow keys (◄, ►) to
choose between SET and CLR
(see Setting the Zero Point,
starting on page 13).