Johnson Systems JS-ICON Series Dimmer/Relay Rack (2410,2413,1220,1210/620) - Manual (Page 9)

www.johnsonsystems.com 9
12
34
5
678
91
01
3
11
12
14
15
16
17
18
19
20
21
22
23
24
Load Output
Terminal Blocks
Line Voltage
AC Wire / Conduit
Entry
Line Voltage
AC Contractor
Termination
Section
Line Voltage
AC Wire / Conduit
Entry
Low Voltage
DC Wire / Conduit
Entry
Low Voltage
DC Contractor
Termination
Section
Low Voltage
DC Wire / Conduit
Entry
TOP VIEW
REAR VIEW
BOTTOM VIEW
Dimmer Output
JS-ICON ™ 2410 24 x 10 Amp (1200 Watt) dimmers.
JS-ICON ™ 2413 24 x 13 Amp (1560 Watt) dimmers.
JS-ICON ™ 1220 12 x 20 Amp (2400 Watt) dimmers.
JS-ICON ™ 1210/620 12 x 10 Amp (1200 Watt) and
6 x 20 Amp (2400 Watt) dimmers.
JS-ICON ™ Series dimmer racks are designed for high performance dimming of
standard incandescent, quartz, and dimmable (SCR/Leading-Edge) electronic
low-voltage fixtures. The dimmer outputs may be configured for non-dimmed
applications when switched (relay controlled) load outputs are required.
Knockouts on the top and bottom of the chassis are provided for wire/conduit
entry to the power terminals.
Load (Hot) Output Connection Details
Load output connections are terminated via DIN rail mounted terminal blocks.
Models JS-ICON
™ 2410 and JS-ICON ™ 2413
• Use wire size #14 to #10 AWG. Strip insulation length to 0.315" (8mm).
• Torque load output terminal blocks to 5-7 IN-LBS (0.6-0.8 NM).
Model JS-ICON ™ 1220
• Use wire size #14 to #8 AWG. Strip insulation length to 0.4" (10mm).
• Torque load output terminal blocks to 13-16 IN-LBS (1.5-1.8 NM).
Model JS-ICON ™ 1210/620
• For load output terminal blocks 1 to 12, use
same specification as Model JS-ICON ™
2410.
• For load output terminal blocks 13 to 18,
use same specification as Model JS-
ICON ™ 1220.
NOTE: For connection use copper wire
only, rated for 167°F (75°C) minimum.