Johnson Systems CS-DMX Series Programmable Stations - Manual (Page 4)

www.johnsonsystems.com 4
6-Position Connector (J1) For:
• Power Supply Input (COM, V+)
• Button Contacts (ON, DIM, RST)
• Master Pot (MP) Analog Output
DMX Output Range Calibration Jumper (JP1)
Security Enable/Disable Jumper (JP2)
Factory Only Jumper(s)
DMX Input Connector (J1)
DMX Output Connector (J2)
DMX Termination Jumper (JP1)
"ON", "DIM", and "OFF" Buttons With Integral LED's
Master (M) Slider
Infared LED Sensor
Secondary (3, 6, 9, or 12) Sliders
CS-DMX Series Control Station Diagrams