Johnson Systems CS-IPRO Wireless Hand-Held Programmer for CS-DMX Series - Manual (Page 5)

www.johnsonsystems.com 5
EEPROM Memory Module
Infrared LED Window (Top)
Power ON/OFF Switch
LCD Display
Programming Switches
Battery Compartment (Back)
System Status - LCD Display
The top line of the LCD display always shows “JSI IPRO” unless the configuration menu items
are being accessed.
The bottom line of the LCD display shows the current status. In normal run mode it will show
“>REMOTE<”. If a low battery level (2.0V to 2.1V) is sensed, it will show “LOW BAT!” indicating
the batteries need to be replaced. If a critical battery level (1.9V or less) is sensed, it will show
“CRITICAL” on the top line and “PWR DOWN” on the bottom line for 5 seconds and then
automatically power off.