Johnson Systems CS-IPRO Wireless Hand-Held Programmer for CS-DMX Series - Manual (Page 6)

www.johnsonsystems.com 6
Quick Programming Reference
to System Configuration Menu Items
1. CHECK Check the DMX channel patch for each of the sliders.
PATCH Checks the patch saved in the CS-IPRO memory only.
2. EDIT Edit the patch and assign DMX channel(s) to each of the sliders.
PATCH Edits the patch saved in the CS-IPRO memory only.
3. CLEAR Clear the DMX channel patch for a selected slider or all sliders.
PATCH Clears the patch saved in the CS-IPRO memory only.
4. SET CS Set the DMX channel patch for a CS-DMX control station.
PATCH Transfers the patch from CS-IPRO memory to control station memory.
5. GET CS Get the existing DMX channel patch from a CS-DMX control station.
PATCH Transfers the patch from control station memory to CS-IPRO memory.
6. SAVE Save the DMX channel patch into the removable EEPROM Memory Module.
PATCH Saves the patch in the CS-IPRO memory only.
7. LOAD Load the DMX channel patch from the removable EEPROM Memory Module.
PATCH Loads and saves the patch into the CS-IPRO memory.
8. EEPROM View the type of EEPROM memory module plugged into the CS-IPRO.
IPRO-X
9. EEPROM Load new firmware into the CS-IPRO via the EEPROM memory module.
FW-LOAD
10. EDIT KEY Edit the security key for the CS-IPRO.
SECURITY
11. SET KEY Set the security key for a CS-DMX control station.
SECURITY
12. GET KEY Get the existing security key from a CS-DMX control station.
SECURITY
13. MONITOR Monitor the slider level on a CS-DMX control station.
SLIDER
14. CHECK CS Check the firmware version running on the CS-DMX control station.
FIRMWARE
15. FIRMWARE View the firmware version running on the CS-IPRO microcontroller.
VER X.X
16. SERIAL # View the CS-IPRO unique six-character silicone serial number.
XXXXXX
17. BATTERY View the CS-IPRO battery voltage level and status.
X.X OKAY
18. PRINTOUT Printout the DMX channel patch for a selected slider or all sliders.
PATCH Prints out the patch saved in the CS-IPRO memory only.
19. LCD VIEW Adjust the contrast of the LCD Display for optimum viewing.
ADJUST
NOTE: Refer to page 11 for typical application procedures.