JUMO PC Security Manager Software PCS (B 70.9703.0) - Manual (Page 18)

4 User List Assistant
18
Min. number of
characters The minimum number of characters (letters and digits) for the length of the
password.
0 = any (from 1 to 10 characters can be entered).
Min. number of
letters The number of letters that must be included in the password.
0 = no letters required.
Min. number of
upper-case
(capital)
letters (A to Z) The number of upper-case letters that must be included in the password.
0 = no upper-case letters required.
Min. number of
lower case
letters (a to z) The number of lower-case letters that must be included in the password.
0 = no lower-case letters required.
Min. number of
digits (0 to 9) The number of digits that must be included in the password.
0 = no digits required.
Max. number of
log-in
attempts The maximum number of errors permitted during a log-in
0 = no limit.
Any number other than 0 means that invalid attempts to log in will be counted.
If this number is exceeded, the user will be locked out. The user will have to be
unlocked by the administrator. A successful log-in resets the counter to 0.
Validity for
“New” status When logging in (through the software, or directly to the device) for the first
time, every user must alter the assigned password. If this parameter is set to
anything other than 0 days, then the time between setting up the user in the
user list and the first log-in of this user will be checked. If the defined time limit
is exceeded, then the user will be locked out. The user will have to be
unlocked by the administrator.
0 = no check of the “New” status.
Validity of the
password The password must be changed every x days.
0 = no change of password required.
Validity after
inactivity The user will be locked out when this time has elapsed, i.e. he has not logged
in for x days. The user will have to be unlocked by the administrator.
The setting for “Validity after inactivity” is similar to the setting for “Validity for
New status”. The time between the previous log-in and the present log-in will
be checked.
0 = no check of inactivity.
Re-
authentication If there is no user activity for x seconds (no keys are pressed), then the user
who is logged in will automatically be logged off. The user will have to log in
again before carrying out the next action.
0 = no re-authentication.