JUMO 14597 safetyM TB/TW - Temperature Limiter and Temperature Monitor Operating Manual - Manual (Page 24)

7 Configuration level 2014-06-12 22
k Factory setting
037 W3Re-W25Re D Thermocouple -1999 to +9999°C -5 to +2500°C
039 Cu-CuNi T Thermocouple EN 60584 -1999 to +9999°C -205 to +405°C
040 Fe-CuNi J Thermocouple EN 60584 -1999 to +9999°C -205 to +1205°C
041 Cu-CuNi U Thermocouple DIN 43710 -1999 to +9999°C -205 to +605°C
042 Fe-CuNi L Thermocouple DIN 43710 -1999 to +9999°C -205 to +905°C
043 NiCr-Ni K Thermocouple EN 60584 -1999 to +9999°C -205 to +1377°C
044 Pt10Rh-Pt S Thermocouple EN 60584 -1999 to +9999°C -5 to +1773°C
045 Pt13Rh-Pt R Thermocouple EN 60584 -1999 to +9999°C -5 to +1773°C
046 Pt30Rh-Pt6Rh B Thermocouple EN 60584 -1999 to +9999°C 295 to 1825°C
048 NiCrSi-NiSi N Thermocouple EN 60584 -1999 to +9999°C -105 to +1305°C
052 0 to 20 mA -1999 to +9999°C 0 to 21mA
053 4 to 20 mA -1999 to +9999°C 3.6 to 21mA
063 0 to 10 V -1999 to +9999°C 0 to 10.5 V
071 2 to 10 V -1999 to +9999°C 1.8 to 10.5V
v Chapter 10.4 “Restricting the setting
range for the AL limit (minimum/maximum
value master)”
Analog input Comment
Setting range for AL:
(can be restricted via
setup) Limits for
overrange/
underrange