KD Scientific Legato 200 Series - Manual (Page 48)

48
Operating the KDS Legato 200 Series
K
D
S
L
e
g
a
to
2
0
0
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
Link Program
The Link Command is used to insert a link to another
stored Program into the operating sequence of a
Program. You can Link a Program any place in the
Program sequence.
Stop
The Stop Command is used to instruct the pump to stop
operation. This Command can be used in conjunction
with I/O Events to control pump operation based on
external events.
TO INSERT A STOP COMMAND IN A PROGRAM:
1. From the Program Main screen, choose
Step Definition to enter the Step Definition screen.
2. Highlight (select once) the Program Step that you
want the Stop Command to follow.
3. Choose the button to access the
Program Steps Menu screen.
4. Choose Advanced Options to enter the Set
Advanced Options screen.
5. Choose Stop to insert the Stop Command into
the Program.
‘INS STEP’
TO LINK TO A STORED PROGRAM:
1. From the Program Main screen, choose
Step Definition to enter the Step Definition screen.
2. Highlight (select once) the Program Step that you
want the Link Command to follow.
3. Choose the button to access the
Program Steps Menu screen.
4. Choose Advanced Options to enter the Set
Advanced Options screen.
5. Choose Link to enter the Link Selection screen and
display a list of the saved Programs available.
6. Double tap the Program that you want to link to in
the current Program. If the desired Program is not
listed on the screen, use the
or
buttons to scroll through the Program List.
Upon selection you are returned to the
Step Definition screen.
‘PAGE DOWN’ ‘PAGE UP’ ‘LINE DOWN’
‘LINE UP’
‘INS STEP’
Advanced Options Link Command selection screen
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com