Klein Tools DTL304 - Manual (Page 6)

6
ENGLISH
SET UP INSTRUCTIONS
A. Before Operating
• Plug the thermocouple(s) into the input terminal(s).
• Press “ ” to turn the instrument on. After 1 second,
the thermometer displays the fi rst reading and its internal
temperature. If no thermocouple is plugged into the selected input
or the thermocouple is “OPEN”, the display shows “----”.
B. Set Up Mode
• Use “SETUP” to reset the thermometer or change the date
settings, time units, time settings, thermocouple type, Auto-
Power-Off mode, logging interval, and offset.
• When the thermometer is in “SETUP” mode, the display always
shows “SETUP”.
• Press and Hold “ ” for more than 1 second to start or exit
“SETUP” mode.
NOTE: The meter must be in normal operation mode. (Not NOTE: NOTE:
logging or displaying Min/Max/Avg values)
• Press “EXIT” or Press and Hold “ ” for more than 1 second
to exit “SETUP”.
NOTE: Press NOTE: NOTE: “ ” or “ ” to scroll to the setup option you
want to change and then press “ENTER” to accept the selected
setup option.
C. Date
• Entering Setup will show the first option of “ ”
• Press “ENTER” and the display will show “ ”
• Press “ ” or “ ” to select the correct year. Press “ENTER”
• Next the meter will indicate month and day with “ ”.
• Press “ ” or “ ” to select the correct day. Press “ENTER”
• Press “ ” or “ ” to select the correct month. Press “ENTER”
NOTE: date and time must be set during the same session. NOTE: NOTE:
NOTE: Both the date and time must be set in order to use the NOTE: NOTE:
logging feature.
D. Time Unit
• While in “SETUP” mode, scroll until the display shows “
“ in the primary display and “ “ in the secondary display.
• Press “ENTER” to indicate you want to set the time units. The
display shows “h:m” blinking.
• Press “ ” or “ ” to select the time units you want to
display, and press “ENTER” to store the time units in memory.
E. Time
• Press “ ” or “ ” until the display shows “ ”.
• Press “ENTER” to indicate you want to set the time. The
display shows “ ” blinking.
• Press “ ” or “ ” until the display shows the correct hour
(24-hour format), and the press “ENTER” to store the time in
memory.
NOTE: Holding down “ NOTE: NOTE: ” or “ ” causes the number to
change more quickly.
F. Thermocouple Type
• Press “ ” or “ ” until the display shows “ TYPE ”.
• Press “ENTER” to display the thermocouple type choices (K, J,
E or T). The selected thermocouple type blinks.
• Press “ ” or “ ” to scroll to the desired type appears on the
display, and press “ENTER” to store the thermocouple type in
memory.
G. Changing Auto-Power Off Time
• The thermometer enters Auto-Power-Off mode if no button is
pressed for 30 minutes. Press “ ” to turn the thermometer
on. You can enable or disable Auto-Power-Off mode and also
you can select the Auto-Power-Off mode and also you can
select the Auto-Power-Off time (in minutes) among the 9
choices below:
1. 00:10 h:m
2. 00:20 h:m
3. 00:30 h:m
4. 00:40 h:m
5. 00:50 h:m
6. 00:60 h:m
7. 00:70 h:m
8. 00:80 h:m
9. 00:90 h:m Default >