Black Box 5000 - Manual (Page 133)

CHAPTER 11: Administration
131
After you have entered the correct channel, press
the EXEcute key.
To reset to a Default or Current Configuration,
press the EXEcute key at the appropriate screen.
You will be asked ARE YOU SURE? If you are,
press the EXEcute key again. Press any of the arrow
keys to abort the process.
C OMMAND F ACILITY R ESET
Four types of software resets are available: Node,
Link, Channel, and Integral LAN. The Reset Menu
is accessed from the Command Facility Main Menu.
The Reset Menu is then displayed.
Each type of reset is described in Table 11-1.
Banner Message Menu Functions
Administration
System
Clear Latched Alarms System Reset Restart Link Reset Channel
Default Configuration Current Configuration
Key:
Press Down-Arrow Key Press Right-Arrow Key
Figure 11-2. Menu-flow diagram for LCD/Keypad resets.
COMMAND FACILITY MAIN MENU [node id]
RESET 10
RESET [node id]
1. NODE
2. LINK
3. CHANNEL
4. INTEGRAL LAN
CR - ACCEPT ENTRY
M - MAIN MENU
ENTRY: