Black Box 5000 - Manual (Page 249)

Appendix G: Rackmount Installation
247
The MS1 Rackmount Kit consists of the following
items:
• One rackmount tray
• Four screws
• Four washers—nylon filler
• Four washers—nickel finish
• Four clip nuts
Here is how to install your Multiserver unit in a
19-inch rack using the MS1 Rackmount Kit:
1. Install the clip nuts on the rack. Place the tray
in the rack.
2. Secure both sides of the tray to the rack, using
the screws and the washers (see Figure G-1).
3. Position the unit on the tray from the rear. Put
the front of the standalone unit through the
cutout in the front of the rackmount tray
(see Figure G-2).
Appendix G: Rackmount Installation
TRAY
RACK
CLIP
NUT
TRAY
WASHER: NYLON FILLER
WASHER: NICKEL FINISH
SCREW
TOP VIEW
Figure G-1. Clip nut assembly for rack.