Multiserver 5000, Screen display messages, Message message type explanation – Black Box 5000 User Manual
Page 224
Multiserver 5000
222
ni ADB PROCESS ABORTED
Event
An attempt to place a call on the dial lines has
LINK #
ci
failed. This message is displayed by the call
originating modem.
APPLICABLE TO RTS
Info
In trying to configure an Integral LAN module,
FUNCTIONALITY ONLY
you have selected a module location which does not
support RTS functionality. (Most likely there is a
bridge-only product installed in the module location
you selected. This does not require the configure
menu.)
ni BATTERY LOW
Alarm
Indicates the CMOS battery at node ni is low and a
power loss could result in a cold start of the system.
ni BUFFER OVERFLOW,
Alarm
Data has been lost at Multiserver node ni,
CHANNEL
ci
port ci because of an overflow condition.
<BUSY>
Dialog
Message is sent only to async channel call
originators using matrix switching when the
requested resource is in use by another network
user.
ni BUSY LINK ci
Event
The automatic dial backup function has encountered
a busy signal over the RX or TX dial lines.
CALL INITIATION ALARM
Alarm
Unable to connect to X.21 feeder mux after
configured number of tries. Data in buffers has
been discarded.
<CALL IN PROGRESS>
Dialog
Indicates that an async-call connection is in
progress across the interconnect link.
ni CD ACQUIRE ci
Event
Indicates carrier has been detected on the mux or
interconnect link indicated by ci.
ni CD LOSS ci
Alarm
Indicates carrier loss on link ci.
CHANNEL
ci CURRENTLY
Info
The Command Facility Main Menu functions
USING COMMAND FACILITY
are already being used by the port indicated (ci).
CHANNEL INOPERABLE
Info
You have requested channel status for a voice/fax
port that is not operational.
CHANNEL NOT
Info
An attempt has been made to force
CONNECTED, IN QUEUE
disconnect to one of the following:
OR INHIBITED
• A port already disconnected
• A port waiting in the queue
• An inhibited port, such as a link.
Screen Display Messages
Message
Message Type
Explanation