Blaupunkt Alaska CJ70 - Manual (Page 14)

41
DEUTSCH
ENGLISH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Select waveband/memory level
This radio receives stations in the VHF (FM)
waveband as well as MW and LW (AM) sta-
tions. Three memory levels are available for
the FM waveband, and one memory level is
available for each of the MW and LW bands.
Six stations can be stored on each memory
level.
Selecting the FM memory level
In order to switch between the FM memory
levels
➮
press the softkey,
4
, indicating “NEXT”
as often as necessary for the desired
memory level to be shown in the display.
The memory levels are called up in the se-
quence FM I, FM II and FMT.
Selecting the waveband
In order to select one of the FM, MW or LW
bands
➮
press the TUNE button,
>
, when the
radio is operating.
The radio function menu is shown on the dis-
play.
➮
Press the softkey,
4
, indicating “BND”
as often as necessary for the desired
waveband to be shown in the display.
To return to the basic radio menu
➮
Press the TUNE button,
>
, or wait for
eight seconds. The settings are then
saved.
Setting the station
There are a number of ways to set the sta-
tion.
Automatic station search
➮
Press the or button,
7
.
The next station that can be received is tuned
in.
Manual station tuning
You can also tune to the station manually.
➮
Press the or button,
7
.
Note:
Manual station tuning is only possible if the
RDS convenience function is deactivated.
Browsing a chain of stations (FM only)
If a station is providing several programs it is
possible to browse through this “chain” of sta-
tions.
➮
Press the or button,
7
, in order to
change to the next link in the station
chain.
Note:
In order to use this function, the RDS con-
venience function must be active.
You can only change in this way to a station
that you have already received once. To do
this, use the Scan or Travelstore functions.
Adjusting the sensitivity of the
station search
You can choose whether to search only for
stations with strong signals, or whether weak
stations should be included.
➮
Press the MENU button,
8
.
➮
Press the or button,
7
, as often
as is necessary for “FM-SENS” to ap-
pear in the display.
The current value of the sensitivity is shown
on the display. “SENS 6” indicates the maxi-
mum sensitivity for the reception of distant
transmitters, and “SENS 1” indicates the low-
est sensitivity.
➮
Adjust the desired sensitivity with the
key,
7
.
➮
Press the OK button,
5
or the MENU
button,
8
, to leave the menu. The set-
tings are then saved.
RADIO OPERATION