Blaupunkt Alaska CJ70 - Manual (Page 28)

55
DEUTSCH
ENGLISH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
➮
Press the DEQ button,
6
.
➮
Select “PRESET” with the or but-
ton,
7
.
➮
To select the preset tone, press the or
button,
7
.
➮
Press the OK button,
5
.
➮
When you have completed all the set-
tings, press the DEQ button,
6
.
Level meter / Spectrometer
While you set the equalizer, the level meter in
the display gives you a symbolic indication of
volume and settings.
At other times, the level meter can be switched
to spectrometer display mode.
Switching the spectrometer on and off
➮
Press the MENU button,
8
.
“MENU” appears in the display.
➮
Press the or button,
7
, as often
as is necessary for “PEAK ON” or
“PEAK OFF” to appear in the display.
➮
Press the or buttons,
7
, in order
to switch the spectrometer on or off.
➮
Press the OK button,
5
or the MENU
button,
8
, to leave the menu. The set-
tings are then saved.
EQUALIZER
Equalizer adjustment guide
Tone impression/problem
Bass too quiet
Bass sounds muddy
Booming tone
Unpleasant pressure
Tone lacks depth,
is aggressive, no stereo effect.
Muffled tone
Lack of clarity
Instruments have no brightness
Action
Bass boost with
Filter: “LOW EQ”
Frequency: 50 to 100 Hz
Level :+4 to +6 dB
Reduce lower middle tones with
Filters: “LOW EQ”, “MID EQ”
Frequency: 125 to 400 Hz
Level : approx. -4 dB
Reduce middle tones with
Filters: “MID EQ”, “HIGH EQ”
Frequency: 1,000 to 2,500 Hz
Level : -4 to -6 dB
Boost treble tones with
Filter: “HIGH EQ”
Frequency: approx. 12,500 Hz
Level : +2 to +4 dB