Blaupunkt Alaska CJ70 - Manual (Page 23)

50
Changing the display contents
You can choose between different display
modes during CD changer operation:
●
Display of CD number, track number
and time.
●
Display of CD number, track number
and playing time.
●
Display of CD name and track number.
➮
In order to change between the display
modes, press the DIS button,
:
, as of-
ten as you need for the desired informa-
tion to be shown on the display.
Note:
It is only possible for a CD name to be dis-
played if the inserted CD has been provided
with a name. Read the section on “Naming
CDs”.
Repeat play of individual tracks or
whole CDs (REPEAT)
➮
Press the softkey,
4
, indicating “RPT”.
“RPT TRCK” appears briefly on the display.
➮
In order to repeat play of the whole CD,
press the softkey,
4
, indicating “RPT”
again.
“RPT DISC” appears briefly on the display.
Stopping REPEAT
In order to stop repeating either the current
track or the current CD
➮
press the softkey, 4, indicating “RPT” as
often as necessary for the “RPT OFF” to
be shown in the display.
Playing tracks in random
sequence (MIX)
In order to play the tracks on the current CD
in a random sequence
➮
press the softkey,
4
, indicating “MIX”.
“MIX CD” appears briefly on the display.
In order to play the tracks on all the inserted
CDs in a random sequence
➮
press the softkey,
4
, indicating “MIX”
again.
“MIX MAG” appears briefly on the display.
Note:
The CDC A 08 and the IDC A 09 will make
random selections from all the CDs and all
the tracks in the changer. All other changers
will first play through all the tracks of one CD
at random before moving on to the next CD
in the changer.
Ending MIX
➮
Press the softkey,
4
, indicating “MIX”
as often as necessary for “MIX OFF” to
be shown in the display.
Sampling all tracks on all CDs
(SCAN)
In order to hear a short sample of all the tracks
on all the inserted CDs in ascending order
➮
press the softkey,
4
, indicating “SCA”.
“SCAN” appears in the display.
Ending SCAN
In order to stop sampling the tracks
➮
press the softkey,
4
, indicating “SCA”
again.
The track that is currently being sampled will
continue to be played.
Note:
The duration of the samples can be adjusted.
For information on setting the sampling dura-
tion, read the paragraphs on “Adjusting the
Sample Duration” in the “Radio Operation”
section.
CD CHANGER OPERATION