Blaupunkt Alaska CJ70 - Manual (Page 27)

54
Equalizer
This device has a parametric digital equaliz-
er. In this case, parametric means that in each
of the three filters, one individual frequency
can be emphasised or reduced (with a gain
of +8 to -8 dB).
The following filters are available:
●
LOW EQ 32 - 200 Hz
●
MID EQ 250- 1,600 Hz
●
HIGH EQ 2,000 - 12,500 Hz
These filters can be set without using any
measuring instruments. It allows the sound
properties in the vehicle to be significantly
affected.
Adjustment instructions
When setting the equalizer, we recommend
you use a CD, cassette or MiniDisc (depend-
ing on your car radio) which you are familiar
with.
Before making any adjustments to the equal-
izer zero the tone settings and deactivate the
loudness. For more information, read the sec-
tion on “Tone and volume”.
➮
Listen to a CD, tape cassette or Mi-
niDisc (according to how the radio is
equipped).
➮
Compare the sound you hear with how
you feel it should be.
➮
Now consult the “Equalizer adjustment
guide” table for “Tone impression”.
➮
Adjust the equalizer values as de-
scribed under “Action”.
Switching the equalizer on and
off
➮
To switch off the equalizer, press the
DEQ button,
6
.
“LOW EQ” is shown on the display.
➮
To switch off the equalizer, hold down
the DEQ button,
6
until “DEQ OFF”
briefly appears.
Adjusting the equalizer
➮
Press the DEQ button,
6
.
➮
Select the “LOW EQ”, “MID EQ” or
“HIGH EQ” filter with the or
button,
7
.
➮
To select the frequency, press the or
button,
7
.
➮
Adjust the level with the or key,
7
.
➮
In order to select the next filter, first
press the OK button,
5
, then the or
button,
7
.
➮
When you have completed all the set-
tings, press the DEQ button,
6
.
Adjusting the sharpness of the
filter
➮
Press the DEQ button,
6
.
➮
Select the adjustments for the sharp-
ness of the individual filters “LO-Q-FAC”,
“MI-Q-FAC” or “HI-Q-FAC” with the or
button,
7
.
➮
To adjust the sharpness of the filter,
press the or button,
7
.
➮
In order to select the next filter, first
press the OK button,
5
, then the or
button,
7
.
➮
When you have completed all the set-
tings, press the DEQ button,
6
.
Selecting the tone preset
You can choose preset tone settings for the
following musical styles.
● ROCK
● DISCO
●
JAZZ
●
CLASSIC
●
VOCAL
Settings for these styles have already been
programmed.
EQUALIZER