Leica Biosystems CM3050 S - Manual (Page 59)

59 Leica CM3050S – Cryostat
An electrohydraulic lifting device for individual
working height adjustment is available as an
optional accessory for the CM3050 S cryostat
series.
9.1.1 Designated use
The electrohydraulic height adjustment device
has been designed exclusively for adjustment
of the instrument working level to the individual
height of the user.
It has been designed for use with the Leica
cryostat series CM3050 S only and may under
no circumstances be used to lift other instru-
ments or persons.
Damage resulting from improper use of the
product and/or faulty operation invalidates the
warranty.
Leica will not assume liability for any such dam-
age.
9.1.2 Standard delivery
Electrohydraulic height adjustment device for
cryostat series CM3050 S, complete outfit, con-
sisting of a U-shaped frame on four height-ad-
justable feet and a two-key control unit.
The height adjustment device is available in
2 voltages:
1. 230 – 240 V/ 50 Hz – order no. 14 0443 26147
2. 100 – 115 V/ 60 Hz – order no. 14 0443 26148
Prior to connecting the height adjust-
ment device to mains, check to make
sure that the nominal voltage and fre-
quency indications on the device name
plate correspond to the actual mains
voltage in your lab!
Do not move the height adjustment de-
vice with the Leica CM3050S installed
on the frame. If the place of installa-
tion needs to be changed, first take the
Leica CM3050S down from the height
adjustment device and then move both
devices separately.
Never place your feet underneath the
U-frame when lowering the height ad-
justment device! Risk of injury!
Only authorized Leica technical ser-
vice engineers may carry out repairs
on both the Leica CM3050 S and the
height adjustment device. This applies
especially to all work carried out on
the hydraulic system of the height ad-
justment device.
9.1.3 Safety instructions 9.1 Electrohydraulic height adjustment
Prior to operating the height adjustment device,
make sure to read the present instruction man-
ual. Pay special attention to the following safety
instructions:
9. Appendix