Lenze 9400 Mounting Instructions - Manual (Page 63)

Wiring of the standard device 7
l
63 EDK94ASH24 DE/EN/FR/ES/IT 4.1
Analog inputs, analog outputs
Terminal X3 Labelling Description
GA GND analog signals
AO1 Analog output 1
AO2 Analog output 2
A1+ Analog input 1 +
A1− Analog input 1 −
A1− Analog input 1 −
A1R Terminating resistor for ±20mA
A2+ Analog input 2 +
A2− Analog input 2 −
SSP94000X3 " Shield connection: Fix the shield with EMC wire clamp.
Terminal data
Conductor cross−section Tightening torque
[mm 2 ] [AWG] [Nm] [lb−in]
Flexible
0.2 ... 2.5 24 ... 12 Spring terminal With wire end
ferrule
)
Note!
The "StateLine" design provides a modified version of this connection.
Terminal X3 Labelling Description
GA GND analog signals
A1+ Analog input 1 +
A1− Analog input 1 −
A1− Analog input 1 −
A1R Terminating resistor for ±20mA
SSP94SL0X3 " Shield connection: Fix the shield with EMC wire clamp.