Lenze 9400 Mounting Instructions - Manual (Page 73)

Wiring the device modules
Function modules
8
l
73 EDK94ASH24 DE/EN/FR/ES/IT 4.1
X10 Pin Designation Explanation
1 6
5 9
1 B
TTL output signal from encoder or encoder simulation 2 A
3 A
4 +5 V V
CC
±6 %
5 GND −
6 Z
TTL output signal from encoder or encoder simulation
7 Z
8 Enable Digital output signal
SUBD09010
9 B TTL output signal from encoder or encoder simulation
Displays
Pos. Colour Condition Description
MS Green ON The module is supplied with voltage.
DE Red ON
The module is not accepted by the standard device (see notes
given in the documentation for the standard device).