Memmert AtmoCONTROL - Manual (Page 28)

28 D24042 | Date 09/2014
AtmoCONTROL
5. Protocol
5.1 Importing protocol from network
To be able to import a protocol via network, the appliance and computer must be con-
nected to the network, the correct IP address set (see page 10) and the appliance
switched on and logged in to AtmoCONTROL.
Click on the "Protocol" button (Fig. 12); the protocol data of the appliance are transferred
and displayed and can be further processed – e.g. exported to a spreadsheet file format
(see Section 5.3).
Fig. 12 Protocol display (example)
5.2 Importing protocol from USB data medium
At the appliance, protocols can be exported to an USB storage medium and imported in
AtmoCONTROL:
How protocols on the appliance are exported to USB storage media is described in
the user manual for the appliance.
1. Connect the USB storage medium with the exported protocols to your computer/laptop.
2. Click on „Protocol"„Import”. The protocol data are transferred and displayed in Atmo-
CONTROL.
Protocol data are also loaded automatically if you connect an appliance using the protocol
files on an USB storage medium (see page 11).