Memmert INB 200 - 500 Incubators (Generation 2003) - Manual (Page 11)

BASIC
set
off
on
Th Fr Mo Tu We Sa Su t3
t2
t1
STERI DEFRO
PRINT SETUP
loop
t4
3
4
2
1
°C
rh
mb
% CO
mb
2
IN 1 IN 2 OUT IN 1 IN 2 OUT
MIN
AUTO
MAX
°C h
on
off
page 11
5.2 Controls and indications
5.3 Switching on
The oven is switched on by pressing the push/turn control.
5.4 Setting air changes
Moving the air slider opens and closes the air valve to control the supply and discharge of air.
5.5 Setting the temperature
Hold down the SET key and set the temperature setpoint with the push/turn control.
After the SET key has been released the display briefly flashes the temperature setpoint. The display then
changes to the actual current temperature and the controller starts to control to the selected temperature
setpoint.
Oven switched off. The push/turn control is pushed
in and protected against damage Oven switched on and can be operated using the
push/turn control and the SET key.
Air valve closed Air valve open
push/turn control
(main switch)
set-key air slider
temperature display operating mode
indication
timer display alarm indication heating
Ill : UNB 500