Memmert INB 200 - 500 Incubators (Generation 2003) - Manual (Page 12)

BASIC page 12
6 Selecting the operating mode
After holding down the SET key (approx. 3 sec), the current operating mode flashes on the display. A
different operating mode can be selected with the push/turn control while the SET key is being held down.
After the SET key has been released the controller operates in the new operating mode.
7 Normal operation
In this operating mode the oven operates continuously and heats and controls to the set temperature. On
the ovens UFB/SFB the fan is running continuously.
Setting the temperature:
Hold down the SET key and set the required temperature setpoint with the push/turn control.
After the SET key has been released the display flashes briefly the temperature setpoint.
The display then changes to the actual current temperature and the controller starts to control to the
selected temperature setpoint.
˚C
h
Normal
operation
Timer
operation