MotorGuide Digital Remote DRC - Manual (Page 3)

2
M887655
Note: The remote control system works
with or without the foot pedal attached.
PROGRAMMING THE SERIAL NUMBER
Each remote unit has a unique serial number. Up
to four serial numbers (remotes) can be stored by
your receiver. For your remote to respond to your
commands only and not those of other boaters,
you must program the serial number into your
receiver. Follow the instructions below (one time
only) to program your receiver for each new
remote:
1. Power the motor up - within 10 seconds,
press and hold the + and - buttons on the
remote simultaneously
2. Listen for a long high pitch beep
3. The receiver has now learned and stored
the serial number of the remote.
CONTROLLING THE BOAT REMOTELY
1. Steering: Press the left or right arrow
buttons to steer the boat, a beep will sound