MotorGuide Digital Remote DRC - Manual (Page 5)

4
M887655
not used, the initial speed is equivalent to a
setting of 2 ½ on the foot-pedal.
3. Prop On/Off – turn the prop on or off by
pressing the center button and it will
alternate between on and off. The “on”
condition is indicated by a high- pitched beep
while “off” is indicated by a low-pitched
beep.
USING THE REMOTE WITH A FOOT-
PEDAL
1. For maximum flexibility, the remote can be
used in combination with the foot-pedal.
Please note the following when doing so:
2. The last controller device (foot-pedal or
remote) to send a command will be in
control.
3. When going from foot-pedal to remote
control, the speed and steering will always
start at the last foot-pedal setting, but will end
up wherever the operator sets the remote.
4. When going from remote to foot-pedal
control, the motor will immediately: