MotorGuide Digital Remote DRC - Manual (Page 7)

6
M887655
a) Motor speed can be changed at any time
using the “+” and “-“buttons on the
remote.
REMOTE BATTERY REPLACEMENT
Use only 3V lithium type CR2032 replacement
batteries. Follow these instructions to change the
battery:
1. Remove the four screws on the back of the
remote control.
2. Remove the Remote Control’s back cover
3. Using a pencil, push the battery out of its
holder.
4. With the “+” symbol facing up, slide the new
battery in the holder.
5. Replace the cover and four screws.
SPECIAL COMMANDS
1. Steer to Center – to automatically return to
center, press and hold the steer left and right
arrow buttons on the remote until a low pitch