Purenex Multipure Aquaperform For Model MP880SB - Manual (Page 16)

The MP880SB Drinking Water System has a round bottom and may be left lying on the cabinet floor or mounted on the
wall under your sink. The unit will work in any position; however, be sure to provide sufficient tubing for conveniently
changing the filter when it is time to replace it.
The unit weighs approximately 7.5 pounds with a dry filter; even more when the filter is wet. If you mount the unit on the
wall under your sink, please confirm that the wall will support the weight.
Reference Section IVA for instructions on attaching the bracket to the housing
Attach the bracket and unit to the wall by “hanging” the bracket on the two screws you installed (step #2) by inserting the
screws through the larger hole of the keyhole and slide up into the top, smaller hole, of the keyhole. Confirm that both
sides of the bracket are held by the screws before releasing the housing.
Multi-Pure Inline models are ideal for refrigerators, water coolers, or restaurants where all water to a cold water outlet or
faucet is filtered. Model MP880SI includes the housing, filter, adapters, bracket, and screws. The inline models are appro-
priate for an in-line installation and can be used with your existing faucet. It is recommended that the inline models be
installed by a professional plumber in accordance with established plumbing procedures.
MP880SI
16
VI. Placement of Unit Under Your Sink
VII. Installing Inline Model MP880SI
Top screws
Key hole
Worm clamp
Back View
BEFORE HANGING THE BRACKET ON THE WALL UNDER YOUR SINK,
COMPLETE ALL STEPS UNDER SECTIONS IV AND V.
THEN PLACE THE UNIT UNDER YOUR SINK