Brother DCP-585CW - Manual (Page 14)

Chapter 1
6
Control panel overview
1
The DCP-385C, DCP-383C, DCP-387C and DCP-585CW have the same control panel keys.
1 LCD (liquid crystal display)
Displays messages on the screen to help you
set up and use your machine.
Also, you can adjust the angle of the LCD
screen by lifting it.
2 Number of Copies
Use this key to make multiple copies.
3 Menu keys:
„ d
or c
Press to scroll backward or forward to a
menu selection.
Also, press to choose options.
„
a
or b
Press to scroll through the menus and
options.
„ Clear/Back
Press to go back to the previous menu
level.
„ Menu
Lets you access the main menu to program
the machine.
„ OK
Lets you choose a setting.
4 Start keys:
„ Colour Start
Lets you start making copies in full colour.
Also lets you start a scanning operation (in
colour or mono, depending on the scanning
setting in the ControlCenter software).
„ Mono Start
Lets you start making copies in
monochrome. Also lets you start a
scanning operation (in colour or mono,
depending on the scanning setting in the
ControlCenter software).
5 Stop/Exit
Stops an operation or exits from a menu.
6 On/Off
You can turn the machine on and off.
If you turn the machine off, it will still
periodically clean the print head to maintain
print quality. To maintain print quality, prolong
print head life, and provide the best ink
cartridge economy, you should keep your
machine connected to the power at all times.
Mem. Mem.
Normal
100% 100% Enlarge/Reduce Enlarge/Reduce
Plain Paper Plain Paper Paper Paper Type ype
Ratio: Ratio:
Quality
Mem.
01
1 3 4
5 6
2
9 7 8