Brother DCP-585CW - Manual (Page 56)

Chapter 5
48
Cropping
5
If your photo is too long or wide to fit the
available space on your chosen layout, part
of the image will automatically be cropped.
The factory setting is On. If you want to print
the whole image, turn this setting to Off. If
you are also using the Borderless setting,
turn Borderless to Off. (See Borderless
printing on page 48.)
a
Press a or b to choose Cropping.
b
Press d or c to choose Off (or On).
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Cropping: On
5
Cropping: Off
5
Borderless printing
5
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Press a or b to choose Borderless.
b
Press d or c to choose Off (or On).
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Date Print
5
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn’t
have the date information, you cannot use
this function.
a
Press a or b to choose Date Print.
b
Press d or c to choose On (or Off).
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Note
The DPOF setting on your camera must
be turned off to use the Date Print
feature.