Remove red-eye, Monochrome – Brother DCP-585CW User Manual

Page 49

Advertising
background image

Printing photos from a memory card or USB Flash memory drive

41

5

Remove Red-Eye

5

The machine detects eyes in your photos and
will attempt to remove red-eye from your
photo.

Note

There are some cases when red-eye may
not be removed.

• When the face is too small in the image.

• When the face is turning too far up,

down, left or right.

a

Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).

b

Press a or b to choose
Enhance Photos.
Press OK.

c

Press d or c to choose your photo.
Press OK.

d

Press a or b to choose
Remove Red-Eye.
Press OK.

„

When Remove Red-Eye is
successful, the photo with the effect
is shown. The adjusted part is shown
in a red frame. Press OK.

„

When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press OK to go back to the previous
level.

Note

Press a to try Remove Red-Eye again.

e

Press + or - repeatedly to enter the
number of copies you want.

f

Do one of the following.

„

Press OK and change the print
settings. (See page 45.)

„

If you do not want to change any
settings, press Colour Start to print.

Monochrome

5

You can convert your photo to monochrome.

a

Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).

b

Press a or b to choose
Enhance Photos.
Press OK.

c

Press d or c to choose your photo.
Press OK.

d

Press a or b to choose Monochrome.
Press OK.

e

Press OK. Then press + or - repeatedly
to enter the number of copies you want.

f

Do one of the following.

„

Press OK and change the print
settings. (See page 45.)

„

If you do not want to change any
settings, press Colour Start to print.

Advertising
This manual is related to the following products: