Digital gauges (numeric), Plot gauges, Peak and hold – PLX Devices DM-100 OBDII Touch User Manual
Page 14: 2 digital gauges (numeric), 3 plot gauges, 4 peak and hold
Users Guide: iMFD User Guide
Version 2.0 May 16, 2013
www.plxdevices.com
(408)745-7591
14
4.2 Digital Gauges (Numeric)
Digital gauges represent sensor data in large numeric form. Touch LEFT – RIGHT to switch between
sensors. Touch DOWN to switch to plot gauges. Touch UP to switch to analog gauges.
4.3 Plot Gauges
Plot gauges represent sensor data in a real-time graphical form. The sensor data is plotted on the y-axis
and time is plotted on the x-axis. Touch LEFT – RIGHT to switch between sensors. Touch DOWN to switch
to peak-hold. Touch UP to switch to numeric gauges.
4.4 Peak and Hold
The DM-100 can detect both minimum and maximum values. The peak and hold function works in any
gauge mode, and you are not limited to having to remain on this screen for the DM-100 to memorize the
peak values. Touch LEFT – RIGHT to switch between sensors. Touch DOWN to switch to 2 parameter view.
Touch UP to switch to plot gauges.