PLX Devices DM-100 OBDII Touch - Manual (Page 6)

Users Guide: iMFD User Guide
Version 2.0 May 16, 2013
www.plxdevices.com
(408)745-7591
6
8) Peak and hold (high and low)
9) Intelligent warning (4 parameter comparison)
10) Custom gauge design
11) 4 point capacitive sense touch screen
12) Custom wallpaper upload
13) Automatic sensor detection
14) Extruded aluminum construction
1.4 Package Contents
1) DM-100 OBDII Touch Control Module
2) HDD-100 52mm OLED Display with touch screen
3) Power wire with 2.1mm connector and cigarette adapter
4) 1ft Serial Cable
5) 6ft USB Cable
6) Users Guide
1.5 Software Requirements
The DM-100 comes with PC software. The PC software allows you to do the following
1) Upload 8 Wallpapers (160 x 128 pixels) to the DM-100
2) Upload Custom Gauges (100 Frames) to the DM-100
3) Update DM-100 Sensor Table (If new sensors are available, sensor table must be updated)
Minimum System Requirements:
Windows XP or higher operating system
Pentium 4/Celeron 1GHz+
Athlon/Duron 1GHz+
512MB Ram
2 Overview
2.1 DM-100 OBDII Control Box
1) Connect to 12V-18V power source.
2) Output of SM-OBDII, Connect to additional Display Modules or loops back to sensor input (5)
3) Input of SM-OBDII, Connect from other sensor modules.
4) Connect to next Display Module(s) in chain
5) Connect to previous Display Module or last Sensor Module in chain
6) Connects to gauge head