PLX Devices DM-100 OBDII Touch - Manual (Page 20)

Users Guide: iMFD User Guide
Version 2.0 May 16, 2013
www.plxdevices.com
(408)745-7591
20
UP, DOWN, LEFT, RIGHT – Moves the cursor to select your desired color.
LEFT – RIGHT (Simultaneously 3 seconds) – To exit the color palette.
7.2 Connect to PC
The DM-100 must be in this menu for the PC to
communicate with the device. Toggle to this menu
if you want to upload wallpapers, custom gauge,
and/or update your sensor table.
7.3 Warnings
The DM-100 can monitor up to 4 parameters for warnings. The DM-100 monitors 4 parameters
simultaneously and evaluates if any trigger points have been exceeded. If any of the 4 parameter trigger
points have been exceeded then the DM-100 will evaluate if a warning message should appear on the
display based on the ‘scheme’ setting. To better explain this feature, please take a look at an example.
Example: Parameter 1 is set to read AFR, Parameter 2 is set to read EGT, Parameter 3 is set to read Oil
Temperature and Parameter 4 is set to read Boost. The trigger points are set to the following.
Trigger point settings:
(Parameter 1) AFR > 15.0
(Parameter 2) EGT > 800
(Parameter 3) Oil > 110
(Parameter 4) BST > 15
Example: