PLX Devices DM-100 OBDII Touch - Manual (Page 7)

Users Guide: iMFD User Guide
Version 2.0 May 16, 2013
www.plxdevices.com
(408)745-7591
7
7) Connect to touch screen interface on gauge head
8) Connect to USB port on PC for custom gauge, wallpaper, and sensor table upload
9) Connect to OBDII port in vehicle
2.2 Color OLED Gauge Head
1) 52mm (2 1/16”) OLED Display for DM-100
2) Connect to Control Box HDD port. (DO NOT CONNECT TO COMPUTER’s MONITOR OUTPUT!)
3) Connect to Control Box Remote port.
2.3 Touch Screen Interface
*Note RIGHT and LEFT touch screen locations are slightly above the center line of the gauge.
In Gauge Mode:
While the DM-100 is in Gauge Mode, touch Left – Right to switch between the gauge parameters
available. Touch Up – Down to switch between the type of gauge style you wish to view. Please refer to
section (2.4) for more details how to navigate the menu system.
Touch and hold both Left – Right for 3 seconds to enter into the setup menu.
OBDII Sensor Mode: